Find Research outputs

Search results

• Article

  3D echocardiographic global longitudinal strain can identify patients with mildly-to-moderately reduced ejection fraction at higher cardiovascular risk

  Medvedofsky, D., Lang, R. M., Weinert, L., Tehrani, D. M., Narang, A. & Mor-Avi, V., Jan 1 2019, In: International Journal of Cardiovascular Imaging.

  Research output: Contribution to journal › Article › peer-review
  3 Scopus citations

• 3D Echocardiography: A Review of the Current Status and Future Directions

  Hung, J., Lang, R., Flachskampf, F., Shernan, S. K., McCulloch, M. L., Adams, D. B., Thomas, J., Vannan, M. & Ryan, T., Mar 2007, In: Journal of the American Society of Echocardiography. 20, 3, p. 213-233 21 p.

  Research output: Contribution to journal › Article › peer-review
  256 Scopus citations

• 3D extruded composite thermoelectric threads for flexible energy harvesting

  Peng, J., Witting, I., Geisendorfer, N., Wang, M., Chang, M., Jakus, A., Kenel, C., Yan, X., Shah, R., Snyder, G. J. & Grayson, M., Dec 1 2019, In: Nature communications. 10, 1, 5590.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  38 Scopus citations

• 3D Ferrimagnetic Device for Multi-Bit Storage and Efficient In-Memory Computing

  Zhang, Z., Zheng, Z., Zhang, Y., Sun, J., Lin, K., Zhang, K., Feng, X., Chen, L., Wang, J., Wang, G., Du, Y., Zhang, Y., Bournel, A., Amiri, P. K. & Zhao, W., Feb 2021, In: IEEE Electron Device Letters. 42, 2, p. 152-155 4 p., 9309002.

  Research output: Contribution to journal › Article › peer-review
  2 Scopus citations

• 3-D FLASH Imaging using a single surface coil and a new adiabatic pulse, BIR-4

  Staewen, R. S., Johnson, A. J., Ross, B. D., Parrish, T., Merkle, H. & Garwood, M., May 1990, In: Investigative radiology. 25, 5, p. 559-567 9 p.

  Research output: Contribution to journal › Article › peer-review
  133 Scopus citations

• 3D gas-phase elemental abundances across the formation histories of Milky Way-mass galaxies in the FIRE simulations: Initial conditions for chemical tagging

  Bellardini, M. A., Wetzel, A., Loebman, S. R., Faucher-Giguère, C. A., Ma, X. & Feldmann, R., Aug 1 2021, In: Monthly Notices of the Royal Astronomical Society. 505, 3, p. 4586-4607 22 p.

  Research output: Contribution to journal › Article › peer-review
  5 Scopus citations

• 3D geometry of a normal tricuspid annulus during systole: A comparison study with the mitral annulus using real-time 3D echocardiography

  Kwan, J., Kim, G. C., Jeon, M. J., Kim, D. H., Shiota, T., Thomas, J. D., Park, K. S. & Lee, W. H., Oct 1 2007, In: European Journal of Echocardiography. 8, 5, p. 375-383 9 p.

  Research output: Contribution to journal › Article › peer-review
  43 Scopus citations

• 3D hierarchical architectures based on self-rolled-up silicon nitride membranes

  Froeter, P., Yu, X., Huang, W., Du, F., Li, M., Chun, I., Kim, S. H., Hsia, K. J., Rogers, J. A. & Li, X., Nov 29 2013, In: Nanotechnology. 24, 47, 475301.

  Research output: Contribution to journal › Article › peer-review
  50 Scopus citations

• 3D-high resolution manometry of the esophagogastric junction

  Kwiatek, M. A., Pandolfino, J. E. & Kahrilas, P. J., Nov 2011, In: Neurogastroenterology and Motility. 23, 11, p. e461-e469

  Research output: Contribution to journal › Article › peer-review
  44 Scopus citations

• 3-D image processing in soft X-ray holographic microscopy

  Jacobsen, C. & Lindaas, S., Jan 1 1991, In: Scanning. 13, SUPPL. 1

  Research output: Contribution to journal › Article › peer-review

• 3-Dimensional graphene-like structures and applications: general discussion

  Backes, C., Behera, R. K., Bellamy-Carter, A., Bianco, A., Caps, V., Casiraghi, C., Chhowalla, M., Criado, A., Davies, T., Ferrari, A. C., Fornasaro, S., Galembeck, F., Goldie, S., Hersam, M. C., Kamali, A. R., Kolosov, V., Kumar, V., Lee, W. H., Martsinovich, N., Melchionna, M., & 14 othersMelucci, M., Molle, A., Morgan, H., Neumann, C., Nowack, T., Oyarzun, A., Palermo, V., Papanai, G. S., Prato, M., Shin, Y., Sui, R., Teixeira, I. F., Wang, G. & Xia, Z., Apr 1 2021, In: Faraday Discussions. 227, p. 359-382 24 p.

  Research output: Contribution to journal › Article › peer-review

• 3-Dimensional Magnetic Resonance Genitography: A Different Look at Cloacal Malformations

  Baughman, S. M., Richardson, R. R., Podberesky, D. J., Dalrymple, N. C. & Yerkes, E. B., Oct 2007, In: Journal of Urology. 178, 4 SUPPLEMENT, p. 1675-1679 5 p.

  Research output: Contribution to journal › Article › peer-review
  17 Scopus citations

• 3-dimensional nanoscale structural characterization of magnetic tunnel junction

  Liu, Y. Z., Petford-Long, A. K., Schreiber, D. K., Choi, Y. S., Djayaprawira, D. & Seidman, D. N., Jul 2009, In: Microscopy and Microanalysis. 15, SUPPL. 2, p. 1248-1249 2 p.

  Research output: Contribution to journal › Article › peer-review

• 3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices

  Kenel, C., Casati, N. P. M. & Dunand, D. C., Dec 1 2019, In: Nature communications. 10, 1, 904.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  60 Scopus citations

• 3D ink-extrusion printing and sintering of Ti, Ti-TiB and Ti-TiC microlattices

  Song, B., Kenel, C. & Dunand, D. C., Oct 2020, In: Additive Manufacturing. 35, 101412.

  Research output: Contribution to journal › Article › peer-review
  12 Scopus citations

• 3D ink-printed, sintered porous silicon scaffolds for battery applications

  Moser, S., Kenel, C., Wehner, L. A., Spolenak, R. & Dunand, D. C., Sep 30 2021, In: Journal of Power Sources. 507, 230298.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  7 Scopus citations

• 3D interconnected SnO₂-coated Cu foam as a high-performance anode for lithium-ion battery applications

  Um, J. H., Park, H., Cho, Y. H., Glazer, M. P. B., Dunand, D. C., Choe, H. & Sung, Y. E., 2014, In: RSC Advances. 4, 101, p. 58059-58063 5 p.

  Research output: Contribution to journal › Article › peer-review
  32 Scopus citations

• 3D macroporous electrode and high-performance in lithium-ion batteries using SnO 2 coated on Cu foam

  Um, J. H., Choi, M., Park, H., Cho, Y. H., Dunand, D. C., Choe, H. & Sung, Y. E., Jan 4 2016, In: Scientific reports. 6, 18626.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  45 Scopus citations

• 3D mapping of cerebrospinal fluid local volume changes in patients with hydrocephalus treated by surgery: Preliminary study

  Hodel, J., Besson, P., Rahmouni, A., Petit, E., Lebret, A., Grandjacques, B., Outteryck, O., Benadjaoud, M. A., Maraval, A., Luciani, A., Pruvo, J. P., Decq, P. & Leclerc, X., Jan 2014, In: European Radiology. 24, 1, p. 136-142 7 p.

  Research output: Contribution to journal › Article › peer-review
  8 Scopus citations

• 3D-MICE: Integration of cross-sectional and longitudinal imputation for multi-analyte longitudinal clinical data

  Luo, Y., Szolovits, P., Dighe, A. S. & Baron, J. M., Jun 1 2018, In: Journal of the American Medical Informatics Association. 25, 6, p. 645-653 9 p.

  Research output: Contribution to journal › Article › peer-review
  52 Scopus citations

• 3-D microwave imaging of breast tumors with matched-filtering

  Oral, E. A. & Sahakian, A. V., Dec 1 2004, In: Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings. 26 II, p. 1423-1426 4 p.

  Research output: Contribution to journal › Article › peer-review
  1 Scopus citations

• 3D modeling of subsurface fatigue crack nucleation potency of primary inclusions in heat treated and shot peened martensitic gear steels

  Prasannavenkatesan, R., Zhang, J., McDowell, D. L., Olson, G. B. & Jou, H. J., Jul 2009, In: International Journal of Fatigue. 31, 7, p. 1176-1189 14 p.

  Research output: Contribution to journal › Article › peer-review
  82 Scopus citations

• 3D morphological evolution of porous titanium by x-ray micro- and nano-tomography

  Chen-Wiegart, Y. C. K., Wada, T., Butakov, N., Xiao, X., De Carlo, F., Kato, H., Wang, J., Dunand, D. C. & Maire, E., Sep 14 2013, In: Journal of Materials Research. 28, 17, p. 2444-2452 9 p.

  Research output: Contribution to journal › Article › peer-review
  38 Scopus citations

• 3D MR flow analysis in realistic rapid-prototyping model systems of the thoracic aorta: Comparison with in vivo data and computational fluid dynamics in identical vessel geometries

  Canstein, C., Cachot, P., Faust, A., Stalder, A. F., Bock, J., Frydrychowicz, A., Küffer, J., Hennig, J. & Markl, M., Mar 2008, In: Magnetic resonance in medicine. 59, 3, p. 535-546 12 p.

  Research output: Contribution to journal › Article › peer-review
  90 Scopus citations

• 3D MRI provides improved visualization and detection of aortic arch plaques compared to transesophageal echocardiography

  Harloff, A., Brendecke, S. M., Simon, J., Assefa, D., Wallis, W., Helbing, T., Weber, J., Frydrychowicz, A., Vach, W., Weiller, C. & Markl, M., Sep 2012, In: Journal of Magnetic Resonance Imaging. 36, 3, p. 604-611 8 p.

  Research output: Contribution to journal › Article › peer-review
  13 Scopus citations

• 3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium

  Xu, L., Gutbrod, S. R., Bonifas, A. P., Su, Y., Sulkin, M. S., Lu, N., Chung, H. J., Jang, K. I., Liu, Z., Ying, M., Lu, C., Webb, R. C., Kim, J. S., Laughner, J. I., Cheng, H., Liu, Y., Ameen, A., Jeong, J. W., Kim, G. T., Huang, Y., & 2 othersEfimov, I. R. & Rogers, J. A., Feb 25 2014, In: Nature communications. 5, 3329.

  Research output: Contribution to journal › Article › peer-review
  393 Scopus citations

• 3D nanocrystal images at atomic resolution from diffraction data using iterative algorithms

  Wu, J. S. & Spence, J. C. H., 2003, In: Microscopy and Microanalysis. 9, SUPPL. 2, p. 1184-1185 2 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3D noncontrast MR angiography of the distal lower extremities using flow-sensitive dephasing (FSD)-prepared balanced SSFP

  Fan, Z., Sheehan, J., Bi, X., Liu, X., Carr, J. & Li, D., Dec 2009, In: Magnetic resonance in medicine. 62, 6, p. 1523-1532 10 p.

  Research output: Contribution to journal › Article › peer-review
  89 Scopus citations

• 3D Non-destructive morphological analysis of a solid oxide fuel cell anode using full-field X-ray nano-tomography

  Karen Chen-Wiegart, Y. C., Cronin, J. S., Yuan, Q., Yakal-Kremski, K. J., Barnett, S. A. & Wang, J., Nov 15 2012, In: Journal of Power Sources. 218, p. 348-351 4 p.

  Research output: Contribution to journal › Article › peer-review
  56 Scopus citations

• 3D nongadolinium-enhanced mra using flow-sensitive dephasing (fsd) prepared balanced ssfp: Identification of the optimal first-order gradient moment

  Fan, Z., Bi, X., Zhou, X., Zuehlsdorff, S., Carr, J. & Li, D., 2010, In: Journal of Cardiovascular Magnetic Resonance. 12, SUPPL. 1, O65.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Scopus citations

• 3D numerical simulation of seagrass movement under waves and currents with GPUSPH

  Paquier, A. E., Oudart, T., Le Bouteiller, C., Meulé, S., Larroudé, P. & Dalrymple, R. A., Dec 2021, In: International Journal of Sediment Research. 36, 6, p. 711-722 12 p.

  Research output: Contribution to journal › Article › peer-review
  2 Scopus citations

• 3D-Plex grammars

  Lin, W. C. & Fu, K. S., Oct 1984, In: Information Sciences. 34, 1, p. 1-24 24 p.

  Research output: Contribution to journal › Article › peer-review
  3 Scopus citations

• 3D porous chitosan-alginate scaffolds: A new matrix for studying prostate cancer cell-lymphocyte interactions in vitro

  Florczyk, S. J., Liu, G., Kievit, F. M., Lewis, A. M., Wu, J. D. & Zhang, M., Sep 2012, In: Advanced Healthcare Materials. 1, 5, p. 590-599 10 p.

  Research output: Contribution to journal › Article › peer-review
  70 Scopus citations

• 3D Position Sensitive XeTPC for Dark Matter Search

  Angle, J., Aprile, E., Arneodo, F., Baudis, L., Bernstein, A., Bolozdynya, A., Coelho, L., Dahl, E., DeViveiros, L., Ferella, A., Fernandes, L., Fiorucci, S., Gaitskell, R. J., Giboni, K. L., Gomez, R., Hasty, R., Kwong, J., Lopes, J. A. M., Madden, N., Manalaysay, A., & 13 othersManzur, A., McKinsey, D., Monzani, M. E., Ni, K., Oberlack, U., Orboeck, J., Plante, G., Santos, J., Shagin, P., Shutt, T., Sorensen, P., Winant, C. & Yamashita, M., Nov 2007, In: Nuclear Physics B - Proceedings Supplements. 173, p. 117-120 4 p.

  Research output: Contribution to journal › Article › peer-review
  5 Scopus citations

• 3D-printed biomaterials with regional auxetic properties

  Warner, J. J., Gillies, A. R., Hwang, H. H., Zhang, H., Lieber, R. L. & Chen, S., Dec 2017, In: Journal of the Mechanical Behavior of Biomedical Materials. 76, p. 145-152 8 p.

  Research output: Contribution to journal › Article › peer-review
  24 Scopus citations

• 3D-printed biomimetic surface structures with abnormal friction properties

  Yuan, W., Yao, Y., Keer, L., Jiao, Y., Yu, J., Li, Q. & Feng, X. Q., Jan 2019, In: Extreme Mechanics Letters. 26, p. 46-52 7 p.

  Research output: Contribution to journal › Article › peer-review
  6 Scopus citations

• 3D printed castle style Fabry-Perot microcavity on optical fiber tip as a highly sensitive humidity sensor

  Chen, M. Q., Zhao, Y., Wei, H. M., Zhu, C. L. & Krishnaswamy, S., Feb 1 2021, In: Sensors and Actuators, B: Chemical. 328, 128981.

  Research output: Contribution to journal › Article › peer-review
  28 Scopus citations

• 3D-Printed Ceramic-Demineralized Bone Matrix Hyperelastic Bone Composite Scaffolds for Spinal Fusion

  Driscoll, J. A., Lubbe, R., Jakus, A. E., Chang, K., Haleem, M., Yun, C., Singh, G., Schneider, A. D., Katchko, K. M., Soriano, C., Newton, M., Maerz, T., Li, X., Baker, K., Hsu, W. K., Shah, R. N., Stock, S. R. & Hsu, E. L., Feb 2020, In: Tissue Engineering - Part A. 26, 3-4, p. 157-166 10 p.

  Research output: Contribution to journal › Article › peer-review
  17 Scopus citations

• 3D-Printed Electroactive Hydrogel Architectures with Sub-100 µm Resolution Promote Myoblast Viability

  Keate, R. L., Tropp, J., Collins, C. P., Ware, H. O. T., Petty, A. J., Ameer, G. A., Sun, C. & Rivnay, J., 2022, (Accepted/In press) In: Macromolecular Bioscience.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• 3D-printed gelatin scaffolds of differing pore geometry modulate hepatocyte function and gene expression

  Lewis, P. L., Green, R. M. & Shah, R. N., Mar 15 2018, In: Acta Biomaterialia. 69, p. 63-70 8 p.

  Research output: Contribution to journal › Article › peer-review
  85 Scopus citations

• 3D printed hyperelastic “bone” scaffolds and regional gene therapy: A novel approach to bone healing

  Alluri, R., Jakus, A., Bougioukli, S., Pannell, W., Sugiyama, O., Tang, A., Shah, R. & Lieberman, J. R., Apr 2018, In: Journal of Biomedical Materials Research - Part A. 106, 4, p. 1104-1110 7 p.

  Research output: Contribution to journal › Article › peer-review
  33 Scopus citations

• 3D-printed lab-in-a-syringe voltammetric cell based on a working electrode modified with a highly efficient Ca-MOF sorbent for the determination of Hg(II)

  Kokkinos, C., Economou, A., Pournara, A., Manos, M., Spanopoulos, I., Kanatzidis, M., Tziotzi, T., Petkov, V., Margariti, A., Oikonomopoulos, P. & Papaefstathiou, G. S., Oct 15 2020, In: Sensors and Actuators, B: Chemical. 321, 128508.

  Research output: Contribution to journal › Article › peer-review
  22 Scopus citations

• 3D printed magnetically-actuating micro-gripper operates in air and water

  Shao, G., Ware, H. O. T., Huang, J., Hai, R., Li, L. & Sun, C., Feb 2021, In: Additive Manufacturing. 38, 101834.

  Research output: Contribution to journal › Article › peer-review
  10 Scopus citations

• 3D printed pathological sectioning boxes to facilitate radiological-pathological correlation in hepatectomy cases

  Trout, A. T., Batie, M. R., Gupta, A., Sheridan, R. M., Tiao, G. M. & Towbin, A. J., Nov 2017, In: Journal of Clinical Pathology. 70, 11, p. 984-987 4 p.

  Research output: Contribution to journal › Article › peer-review
  11 Scopus citations

• 3D Printing Customized Optical Lens in Minutes

  Shao, G., Hai, R. & Sun, C., Feb 1 2020, In: Advanced Optical Materials. 8, 4, 1901646.

  Research output: Contribution to journal › Article › peer-review
  23 Scopus citations

• 3D Printing for Liver Tissue Engineering: Current Approaches and Future Challenges

  Lewis, P. L. & Shah, R. N., 2016, In: Current Transplantation Reports. 3, 1, p. 100-108 9 p.

  Research output: Contribution to journal › Article

  22 Scopus citations

• 3D Printing of highly textured bulk thermoelectric materials: Mechanically robust BiSbTe alloys with superior performance

  Qiu, J., Yan, Y., Luo, T., Tang, K., Yao, L., Zhang, J., Zhang, M., Su, X., Tan, G., Xie, H., Kanatzidis, M. G., Uher, C. & Tang, X., Oct 2019, In: Energy and Environmental Science. 12, 10, p. 3106-3117 12 p.

  Research output: Contribution to journal › Article › peer-review
  66 Scopus citations

• 3D Printing of Liquid Crystal Elastomeric Actuators with Spatially Programed Nematic Order

  Kotikian, A., Truby, R. L., Boley, J. W., White, T. J. & Lewis, J. A., Mar 8 2018, In: Advanced Materials. 30, 10, 1706164.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  336 Scopus citations

• 3D Printing of Micro-Optic Spiral Phase Plates for the Generation of Optical Vortex Beams

  Wei, H., Amrithanath, A. K. & Krishnaswamy, S., Apr 15 2019, In: IEEE Photonics Technology Letters. 31, 8, p. 599-602 4 p., 8660645.

  Research output: Contribution to journal › Article › peer-review
  8 Scopus citations

• 3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure

  Sather, N. A., Sai, H., Sasselli, I. R., Sato, K., Ji, W., Synatschke, C. V., Zambrotta, R. T., Edelbrock, J. F., Kohlmeyer, R. R., Hardin, J. O., Berrigan, J. D., Durstock, M. F., Mirau, P. & Stupp, S. I., Feb 4 2021, In: Small. 17, 5, 2005743.

  Research output: Contribution to journal › Article › peer-review
  20 Scopus citations