A Mixed-Lubrication Study of Journal Bearing Conformal Contacts

Qian Wang, Fanghui Shi, Si C. Lee

Research output: Contribution to journalEditorial

36 Scopus citations


Numerical analyses of finite journal bearings operating with large eccentricity ratios were conducted to better understand the mixed lubrication phenomena in conformal contacts. The average Reynolds equation derived by Patir and Cheng was utilized in the lubrication analysis. The influence function, calculated numerically using the finite element method, was employed to compute the bearing deformation. The effects of bearing surface roughness were incorporated in the present analysis for the calculations of the asperity contact pressure and the asperity contact area. The numerical solutions of the hydrodynamic and asperity contact pressures, lubricant film thickness, and asperity contact area were evaluated based on a simulated bearing-journal geometry. The calculations revealed that the asperity contact pressure may vary significantly along both the width and the circumferential directions. It was also shown that the asperity contacts and the lubricant film thickness were strongly dependent on the bearing width, asperity orientation, and operating conditions.

Original languageEnglish (US)
Pages (from-to)456-461
Number of pages6
JournalJournal of Tribology
Issue number3
StatePublished - Jan 1 1997

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films

Fingerprint Dive into the research topics of 'A Mixed-Lubrication Study of Journal Bearing Conformal Contacts'. Together they form a unique fingerprint.

  • Cite this