Additive manufacturing experimental methods and results, and additive manufacturing scalability

Xu Guo; Gengdong Cheng; Wing Kam Liu

doi:10.1007/978-3-319-63670-2_5

Additive manufacturing experimental methods and results, and additive manufacturing scalability

Xu Guo^*, Gengdong Cheng, Wing Kam Liu

^*Corresponding author for this work

Mechanical Engineering

Research output: Contribution to journal › Conference article › peer-review

Abstract

The fourth session of the first two days of the workshop focused on the experimental studies of AM and some applications in aerospace, medicine and so on. Prof. Lyle E. Levine (National Institute of Standards and Technology), Prof. Anthony Rollett (Carnegie Mellon University), Prof. Dongjiang Wu (Dalian University of Technology), Dr. Lianfeng Wang (Shanghai Aerospace Equipment Manufacture), Prof. Jimin Chen (Beijing University of Technology), Prof. Yonggang Zheng (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

Original language	English (US)
Pages (from-to)	53-69
Number of pages	17
Journal	SpringerBriefs in Applied Sciences and Technology
Issue number	202399
DOIs	https://doi.org/10.1007/978-3-319-63670-2_5
State	Published - 2018
Event	Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016 - Dalian, China Duration: Oct 17 2016 → Oct 19 2016

ASJC Scopus subject areas

Biotechnology
Chemical Engineering(all)
Mathematics(all)
Materials Science(all)
Energy Engineering and Power Technology
Engineering(all)

Access to Document

10.1007/978-3-319-63670-2_5

Cite this

@article{64ea08a111d347a7a7e4738bc75a3354,

title = "Additive manufacturing experimental methods and results, and additive manufacturing scalability",

abstract = "The fourth session of the first two days of the workshop focused on the experimental studies of AM and some applications in aerospace, medicine and so on. Prof. Lyle E. Levine (National Institute of Standards and Technology), Prof. Anthony Rollett (Carnegie Mellon University), Prof. Dongjiang Wu (Dalian University of Technology), Dr. Lianfeng Wang (Shanghai Aerospace Equipment Manufacture), Prof. Jimin Chen (Beijing University of Technology), Prof. Yonggang Zheng (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.",

author = "Xu Guo and Gengdong Cheng and Liu, {Wing Kam}",

note = "Publisher Copyright: {\textcopyright} 2018, The Author(s). Copyright: Copyright 2017 Elsevier B.V., All rights reserved.; Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016 ; Conference date: 17-10-2016 Through 19-10-2016",

year = "2018",

doi = "10.1007/978-3-319-63670-2_5",

language = "English (US)",

pages = "53--69",

journal = "SpringerBriefs in Applied Sciences and Technology",

issn = "2191-530X",

publisher = "Springer Publishing Company",

number = "202399",

}

TY - JOUR

T1 - Additive manufacturing experimental methods and results, and additive manufacturing scalability

AU - Guo, Xu

AU - Cheng, Gengdong

AU - Liu, Wing Kam

PY - 2018

Y1 - 2018

N2 - The fourth session of the first two days of the workshop focused on the experimental studies of AM and some applications in aerospace, medicine and so on. Prof. Lyle E. Levine (National Institute of Standards and Technology), Prof. Anthony Rollett (Carnegie Mellon University), Prof. Dongjiang Wu (Dalian University of Technology), Dr. Lianfeng Wang (Shanghai Aerospace Equipment Manufacture), Prof. Jimin Chen (Beijing University of Technology), Prof. Yonggang Zheng (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

AB - The fourth session of the first two days of the workshop focused on the experimental studies of AM and some applications in aerospace, medicine and so on. Prof. Lyle E. Levine (National Institute of Standards and Technology), Prof. Anthony Rollett (Carnegie Mellon University), Prof. Dongjiang Wu (Dalian University of Technology), Dr. Lianfeng Wang (Shanghai Aerospace Equipment Manufacture), Prof. Jimin Chen (Beijing University of Technology), Prof. Yonggang Zheng (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

UR - http://www.scopus.com/inward/record.url?scp=85034241591&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85034241591&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-63670-2_5

DO - 10.1007/978-3-319-63670-2_5

M3 - Conference article

AN - SCOPUS:85034241591

SP - 53

EP - 69

JO - SpringerBriefs in Applied Sciences and Technology

JF - SpringerBriefs in Applied Sciences and Technology

SN - 2191-530X

IS - 202399

T2 - Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016

Y2 - 17 October 2016 through 19 October 2016

ER -

Additive manufacturing experimental methods and results, and additive manufacturing scalability

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this