Additive manufacturing experimental methods and results, and additive manufacturing scalability

Xu Guo; Gengdong Cheng; Wing Kam Liu

doi:10.1007/978-3-319-63670-2_5

Additive manufacturing experimental methods and results, and additive manufacturing scalability

Xu Guo^*, Gengdong Cheng, Wing Kam Liu

^*Corresponding author for this work

Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

The fourth session of the first two days of the workshop focused on the experimental studies of AM and some applications in aerospace, medicine and so on. Prof. Lyle E. Levine (National Institute of Standards and Technology), Prof. Anthony Rollett (Carnegie Mellon University), Prof. Dongjiang Wu (Dalian University of Technology), Dr. Lianfeng Wang (Shanghai Aerospace Equipment Manufacture), Prof. Jimin Chen (Beijing University of Technology), Prof. Yonggang Zheng (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

Original language	English (US)
Title of host publication	SpringerBriefs in Applied Sciences and Technology
Editors	Xu Guo, Gengdong Cheng, Wing-Kam Liu
Publisher	Springer Verlag
Pages	53-69
Number of pages	17
ISBN (Print)	9783319205526, 9783319636696
DOIs	https://doi.org/10.1007/978-3-319-63670-2_5
State	Published - 2018
Event	Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016 - Dalian, China Duration: Oct 17 2016 → Oct 19 2016

Publication series

Name	SpringerBriefs in Applied Sciences and Technology
Volume	0
ISSN (Print)	2191-530X
ISSN (Electronic)	2191-5318

Other

Other	Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016
Country/Territory	China
City	Dalian
Period	10/17/16 → 10/19/16

ASJC Scopus subject areas

Biotechnology
General Chemical Engineering
General Mathematics
General Materials Science
Energy Engineering and Power Technology
General Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1007/978-3-319-63670-2_5

Cite this

@inproceedings{105645afe23c4a85bdb8a6580deddd66,

title = "Additive manufacturing experimental methods and results, and additive manufacturing scalability",

abstract = "The fourth session of the first two days of the workshop focused on the experimental studies of AM and some applications in aerospace, medicine and so on. Prof. Lyle E. Levine (National Institute of Standards and Technology), Prof. Anthony Rollett (Carnegie Mellon University), Prof. Dongjiang Wu (Dalian University of Technology), Dr. Lianfeng Wang (Shanghai Aerospace Equipment Manufacture), Prof. Jimin Chen (Beijing University of Technology), Prof. Yonggang Zheng (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.",

author = "Xu Guo and Gengdong Cheng and Liu, {Wing Kam}",

note = "Publisher Copyright: {\textcopyright} 2018, The Author(s).; Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016 ; Conference date: 17-10-2016 Through 19-10-2016",

year = "2018",

doi = "10.1007/978-3-319-63670-2_5",

language = "English (US)",

isbn = "9783319205526",

series = "SpringerBriefs in Applied Sciences and Technology",

publisher = "Springer Verlag",

pages = "53--69",

editor = "Xu Guo and Gengdong Cheng and Wing-Kam Liu",

booktitle = "SpringerBriefs in Applied Sciences and Technology",

}

Guo, X, Cheng, G & Liu, WK 2018, Additive manufacturing experimental methods and results, and additive manufacturing scalability. in X Guo, G Cheng & W-K Liu (eds), SpringerBriefs in Applied Sciences and Technology. SpringerBriefs in Applied Sciences and Technology, vol. 0, Springer Verlag, pp. 53-69, Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016, Dalian, China, 10/17/16. https://doi.org/10.1007/978-3-319-63670-2_5

Additive manufacturing experimental methods and results, and additive manufacturing scalability. / Guo, Xu; Cheng, Gengdong; Liu, Wing Kam.
SpringerBriefs in Applied Sciences and Technology. ed. / Xu Guo; Gengdong Cheng; Wing-Kam Liu. Springer Verlag, 2018. p. 53-69 (SpringerBriefs in Applied Sciences and Technology; Vol. 0).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Additive manufacturing experimental methods and results, and additive manufacturing scalability

AU - Guo, Xu

AU - Cheng, Gengdong

AU - Liu, Wing Kam

PY - 2018

Y1 - 2018

N2 - The fourth session of the first two days of the workshop focused on the experimental studies of AM and some applications in aerospace, medicine and so on. Prof. Lyle E. Levine (National Institute of Standards and Technology), Prof. Anthony Rollett (Carnegie Mellon University), Prof. Dongjiang Wu (Dalian University of Technology), Dr. Lianfeng Wang (Shanghai Aerospace Equipment Manufacture), Prof. Jimin Chen (Beijing University of Technology), Prof. Yonggang Zheng (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

AB - The fourth session of the first two days of the workshop focused on the experimental studies of AM and some applications in aerospace, medicine and so on. Prof. Lyle E. Levine (National Institute of Standards and Technology), Prof. Anthony Rollett (Carnegie Mellon University), Prof. Dongjiang Wu (Dalian University of Technology), Dr. Lianfeng Wang (Shanghai Aerospace Equipment Manufacture), Prof. Jimin Chen (Beijing University of Technology), Prof. Yonggang Zheng (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

UR - http://www.scopus.com/inward/record.url?scp=85034241591&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85034241591&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-63670-2_5

DO - 10.1007/978-3-319-63670-2_5

M3 - Conference contribution

AN - SCOPUS:85034241591

SN - 9783319205526

SN - 9783319636696

T3 - SpringerBriefs in Applied Sciences and Technology

SP - 53

EP - 69

BT - SpringerBriefs in Applied Sciences and Technology

A2 - Guo, Xu

A2 - Cheng, Gengdong

A2 - Liu, Wing-Kam

PB - Springer Verlag

T2 - Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016

Y2 - 17 October 2016 through 19 October 2016

ER -

Additive manufacturing experimental methods and results, and additive manufacturing scalability

Abstract

Publication series

Other

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this