Analysis of three-dimeosional cutting process dynamics

X. G. Yang; K. F. Eman; S. M. Wu

doi:10.1115/1.3186006

Analysis of three-dimeosional cutting process dynamics

X. G. Yang, K. F. Eman, S. M. Wu

Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

13 Scopus citations

Abstract

A new experimental method for three-dimensional cutting analysis based on times series models and the Dynamic Data System methodology is introduced. Its theoretical formulation allows the treatment of both orthogonal and threedimensional cutting without any additional complexity. Furthermore, it facilitates an easy explanation and proof of the independence of the inner and outer modulation effects and the use of a simple experimental setup. It is shown that the overall transfer matrix of the three-dimensional cutting process relating the force and relative displacement components can be identified in a single experiment.J, Based on the proposed theoretical models of the cutting process, suitable experimental procedures and methods were proposed and used in actual cutting. The obtained results confirmed the theoretical expectations.

Original language	English (US)
Pages (from-to)	336-342
Number of pages	7
Journal	Journal of Manufacturing Science and Engineering, Transactions of the ASME
Volume	107
Issue number	4
DOIs	https://doi.org/10.1115/1.3186006
State	Published - Nov 1985

ASJC Scopus subject areas

Control and Systems Engineering
Mechanical Engineering
Computer Science Applications
Industrial and Manufacturing Engineering

Access to Document

10.1115/1.3186006

Fingerprint Dive into the research topics of 'Analysis of three-dimeosional cutting process dynamics'. Together they form a unique fingerprint.

Cite this

@article{885a35d4d186474e9b79f0fdee16981b,

title = "Analysis of three-dimeosional cutting process dynamics",

abstract = "A new experimental method for three-dimensional cutting analysis based on times series models and the Dynamic Data System methodology is introduced. Its theoretical formulation allows the treatment of both orthogonal and threedimensional cutting without any additional complexity. Furthermore, it facilitates an easy explanation and proof of the independence of the inner and outer modulation effects and the use of a simple experimental setup. It is shown that the overall transfer matrix of the three-dimensional cutting process relating the force and relative displacement components can be identified in a single experiment.J, Based on the proposed theoretical models of the cutting process, suitable experimental procedures and methods were proposed and used in actual cutting. The obtained results confirmed the theoretical expectations.",

author = "Yang, {X. G.} and Eman, {K. F.} and Wu, {S. M.}",

year = "1985",

month = nov,

doi = "10.1115/1.3186006",

language = "English (US)",

volume = "107",

pages = "336--342",

journal = "Journal of Manufacturing Science and Engineering, Transactions of the ASME",

issn = "1087-1357",

publisher = "American Society of Mechanical Engineers(ASME)",

number = "4",

}

TY - JOUR

T1 - Analysis of three-dimeosional cutting process dynamics

AU - Yang, X. G.

AU - Eman, K. F.

AU - Wu, S. M.

PY - 1985/11

Y1 - 1985/11

N2 - A new experimental method for three-dimensional cutting analysis based on times series models and the Dynamic Data System methodology is introduced. Its theoretical formulation allows the treatment of both orthogonal and threedimensional cutting without any additional complexity. Furthermore, it facilitates an easy explanation and proof of the independence of the inner and outer modulation effects and the use of a simple experimental setup. It is shown that the overall transfer matrix of the three-dimensional cutting process relating the force and relative displacement components can be identified in a single experiment.J, Based on the proposed theoretical models of the cutting process, suitable experimental procedures and methods were proposed and used in actual cutting. The obtained results confirmed the theoretical expectations.

AB - A new experimental method for three-dimensional cutting analysis based on times series models and the Dynamic Data System methodology is introduced. Its theoretical formulation allows the treatment of both orthogonal and threedimensional cutting without any additional complexity. Furthermore, it facilitates an easy explanation and proof of the independence of the inner and outer modulation effects and the use of a simple experimental setup. It is shown that the overall transfer matrix of the three-dimensional cutting process relating the force and relative displacement components can be identified in a single experiment.J, Based on the proposed theoretical models of the cutting process, suitable experimental procedures and methods were proposed and used in actual cutting. The obtained results confirmed the theoretical expectations.

UR - http://www.scopus.com/inward/record.url?scp=85024593676&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85024593676&partnerID=8YFLogxK

U2 - 10.1115/1.3186006

DO - 10.1115/1.3186006

M3 - Article

AN - SCOPUS:0022161779

VL - 107

SP - 336

EP - 342

JO - Journal of Manufacturing Science and Engineering, Transactions of the ASME

JF - Journal of Manufacturing Science and Engineering, Transactions of the ASME

SN - 1087-1357

IS - 4

ER -