Bragg resonator for selective feedback in overmoded oscillators

C. K. Chong*, M. M. Razeghi, D. B. McDermott, N. C. Luhmann

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Summary form only given. Two Bragg resonators have been built for use in a 10-GHz CARM (cyclotron autoresonance maser)/gyro-TWT (traveling wave tube), one with sinusoidal corrugations and the other with rectangular corrugations. A Bragg reflection cavity is formed by separating two corrugated sections by a smooth section. The external quality factor for the cavity is given by Qext = kL/(1 - R1R2), where R1 and R2 represent the reflection coefficients of the two corrugated sections, L is the length of the smooth section, and k = ω/c. The number of cavity modes within the reflector's bandwidth is 2GL/π, where G is the coupling coefficient. The reflectivity of a single section and modes in the composite cavity for both the sinusoidal and rectangular corrugation reflectors were measured.

Original languageEnglish (US)
Title of host publicationIEEE Conference Record - Abstracts
PublisherPubl by IEEE
Number of pages1
StatePublished - Dec 1 1990
Event1990 IEEE International Conference on Plasma Science - Oakland, CA, USA
Duration: May 21 1990May 23 1990

Other

Other1990 IEEE International Conference on Plasma Science
CityOakland, CA, USA
Period5/21/905/23/90

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Bragg resonator for selective feedback in overmoded oscillators'. Together they form a unique fingerprint.

Cite this