Computational and analytical methods in additive manufacturing

Xu Guo; Gengdong Cheng; Wing K Liu

doi:10.1007/978-3-319-63670-2_3

Computational and analytical methods in additive manufacturing

Xu Guo^*, Gengdong Cheng, Wing K Liu

^*Corresponding author for this work

Mechanical Engineering

Research output: Contribution to journal › Conference article › peer-review

Abstract

The second to fourth sessions of the first two days of the workshop were focused on the computational and analytical methods in AM. Prof. Ernst Rank (Technische Universität München), Prof. Weidong Huang (Northwestern Polytechnical University), Prof. Feng Lin (Tsinghua University), Prof. Chunze Yan (Huazhong University of Science and Technology), Dr. Alonso Peralta (Honeywell Aerospace Inc.), Prof. Huiling Duan (Peking University), Prof. Michele Chiumenti (Technical University of Catalonia), Prof. Lars-Erik Lindgren (Luleå University of Technology), Prof. Zhao Zhang (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

Original language	English (US)
Pages (from-to)	11-33
Number of pages	23
Journal	SpringerBriefs in Applied Sciences and Technology
Issue number	202399
DOIs	https://doi.org/10.1007/978-3-319-63670-2_3
State	Published - Jan 1 2018
Event	Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016 - Dalian, China Duration: Oct 17 2016 → Oct 19 2016

ASJC Scopus subject areas

Biotechnology
Chemical Engineering(all)
Mathematics(all)
Materials Science(all)
Energy Engineering and Power Technology
Engineering(all)

Access to Document

10.1007/978-3-319-63670-2_3

Cite this

@article{e843586b13f74d6f9e450c3154403f09,

title = "Computational and analytical methods in additive manufacturing",

abstract = "The second to fourth sessions of the first two days of the workshop were focused on the computational and analytical methods in AM. Prof. Ernst Rank (Technische Universit{\"a}t M{\"u}nchen), Prof. Weidong Huang (Northwestern Polytechnical University), Prof. Feng Lin (Tsinghua University), Prof. Chunze Yan (Huazhong University of Science and Technology), Dr. Alonso Peralta (Honeywell Aerospace Inc.), Prof. Huiling Duan (Peking University), Prof. Michele Chiumenti (Technical University of Catalonia), Prof. Lars-Erik Lindgren (Lule{\aa} University of Technology), Prof. Zhao Zhang (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.",

author = "Xu Guo and Gengdong Cheng and Liu, {Wing K}",

year = "2018",

month = jan,

day = "1",

doi = "10.1007/978-3-319-63670-2_3",

language = "English (US)",

pages = "11--33",

journal = "SpringerBriefs in Applied Sciences and Technology",

issn = "2191-530X",

publisher = "Springer Publishing Company",

number = "202399",

note = "Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016 ; Conference date: 17-10-2016 Through 19-10-2016",

}

TY - JOUR

T1 - Computational and analytical methods in additive manufacturing

AU - Guo, Xu

AU - Cheng, Gengdong

AU - Liu, Wing K

PY - 2018/1/1

Y1 - 2018/1/1

N2 - The second to fourth sessions of the first two days of the workshop were focused on the computational and analytical methods in AM. Prof. Ernst Rank (Technische Universität München), Prof. Weidong Huang (Northwestern Polytechnical University), Prof. Feng Lin (Tsinghua University), Prof. Chunze Yan (Huazhong University of Science and Technology), Dr. Alonso Peralta (Honeywell Aerospace Inc.), Prof. Huiling Duan (Peking University), Prof. Michele Chiumenti (Technical University of Catalonia), Prof. Lars-Erik Lindgren (Luleå University of Technology), Prof. Zhao Zhang (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

AB - The second to fourth sessions of the first two days of the workshop were focused on the computational and analytical methods in AM. Prof. Ernst Rank (Technische Universität München), Prof. Weidong Huang (Northwestern Polytechnical University), Prof. Feng Lin (Tsinghua University), Prof. Chunze Yan (Huazhong University of Science and Technology), Dr. Alonso Peralta (Honeywell Aerospace Inc.), Prof. Huiling Duan (Peking University), Prof. Michele Chiumenti (Technical University of Catalonia), Prof. Lars-Erik Lindgren (Luleå University of Technology), Prof. Zhao Zhang (Dalian University of Technology) respectively, discussed research results, challenges and future directions related to this topic.

UR - http://www.scopus.com/inward/record.url?scp=85034244858&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85034244858&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-63670-2_3

DO - 10.1007/978-3-319-63670-2_3

M3 - Conference article

AN - SCOPUS:85034244858

SP - 11

EP - 33

JO - SpringerBriefs in Applied Sciences and Technology

JF - SpringerBriefs in Applied Sciences and Technology

SN - 2191-530X

IS - 202399

T2 - Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016

Y2 - 17 October 2016 through 19 October 2016

ER -

Computational and analytical methods in additive manufacturing

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this