Control of interjoint coordination during the swing phase of normal gait at different speeds

Jonathan Shemmell*, Jennifer Johansson, Vanessa Portra, Gerald L. Gottlieb, James S. Thomas, Daniel M. Corcos

*Corresponding author for this work

Research output: Contribution to journalArticle

32 Scopus citations

Abstract

Background. It has been suggested that the control of unconstrained movements is simplified via the imposition of a kinetic constraint that produces dynamic torques at each moving joint such that they are a linear function of a single motor command. The linear relationship between dynamic torques at each joint has been demonstrated for multijoint upper limb movements. The purpose of the current study was to test the applicability of such a control scheme to the unconstrained portion of the gait cycle - the swing phase. Methods. Twenty-eight neurologically normal individuals walked along a track at three different speeds. Angular displacements and dynamic torques produced at each of the three lower limb joints (hip, knee and ankle) were calculated from segmental position data recorded during each trial. We employed principal component (PC) analysis to determine (1) the similarity of kinematic and kinetic time series at the ankle, knee and hip during the swing phase of gait, and (2) the effect of walking speed on the range of joint displacement and torque. Results. The angular displacements of the three joints were accounted for by two PCs during the swing phase (Variance accounted for - PC1: 75.1 ± 1.4%, PC2: 23.2 ± 1.3%), whereas the dynamic joint torques were described by a single PC (Variance accounted for - PC1: 93.8 ± 0.9%). Increases in walking speed were associated with increases in the range of motion and magnitude of torque at each joint although the ratio describing the relative magnitude of torque at each joint remained constant. Conclusion. Our results support the idea that the control of leg swing during gait is simplified in two ways: (1) the pattern of dynamic torque at each lower limb joint is produced by appropriately scaling a single motor command and (2) the magnitude of dynamic torque at all three joints can be specified with knowledge of the magnitude of torque at a single joint. Walking speed could therefore be altered by modifying a single value related to the magnitude of torque at one joint.

Original languageEnglish (US)
Article number10
JournalJournal of neuroengineering and rehabilitation
Volume4
DOIs
StatePublished - May 14 2007

ASJC Scopus subject areas

  • Rehabilitation
  • Health Informatics

Fingerprint Dive into the research topics of 'Control of interjoint coordination during the swing phase of normal gait at different speeds'. Together they form a unique fingerprint.

  • Cite this