Development of upsetting-burring process for plate forming

Katsuyoshi Hirasawa*, Kuniaki Dohda, Zhrgang Wang, Naoki Yokoyama

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

2 Scopus citations

Abstract

A new forming process, upsetting-burring process is proposed to produce the parts with a flange from a thick plate. The usual burring operation used in the sheet forming was applied to the thick plate forming and the flange shape can not be obtained satisfactorily. The feature of the newly devised upsetting-burring process has been investigated in detail by FEM analysis and verified by a series of experiments with the aluminum plate. In the upsetting-burring process, the plate is upsetted partly and the upsetted material flows into the flange portion. By changing the upsetting height, width and the taper angle of the lower upsetting die, a flange with sufficient height and good shape accuracy can be formed successfully.

Original languageEnglish (US)
Pages (from-to)2181-2187
Number of pages7
JournalNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume68
Issue number7
DOIs
StatePublished - Jul 2002

Keywords

  • Burring
  • Forging
  • Plastic Forming
  • Press Working
  • Sheet Metal Forming
  • Thick Plate
  • Upsetting

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Development of upsetting-burring process for plate forming'. Together they form a unique fingerprint.

Cite this