Load partitioning in Al2O3-Al composites with three-dimensional periodic architecture

M. L. Young*, R. Rao, J. D. Almer, D. R. Haeffner, J. A. Lewis, D. C. Dunand

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

30 Scopus citations

Abstract

Interpenetrating composites are created by infiltration of liquid aluminum into three-dimensional (3-D) periodic Al2O3 preforms with simple tetragonal symmetry produced by direct-write assembly. Volume-averaged lattice strains in the Al2O3 phase of the composite are measured by synchrotron X-ray diffraction for various uniaxial compression stresses up to -350 MPa. Load transfer, found by diffraction to occur from the metal phase to the ceramic phase, is in general agreement with simple rule-of-mixture models and in better agreement with more complex, 3-D finite-element models that account for metal plasticity and details of the geometry of both phases. Spatially resolved diffraction measurements show variations in load transfer at two different positions within the composite.

Original languageEnglish (US)
Pages (from-to)2362-2375
Number of pages14
JournalActa Materialia
Volume57
Issue number8
DOIs
StatePublished - May 2009

Keywords

  • Aluminum
  • Compression test
  • Metal matrix composites (MMC)
  • Synchrotron radiation
  • X-ray diffraction (XRD)

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Ceramics and Composites
  • Polymers and Plastics
  • Metals and Alloys

Fingerprint Dive into the research topics of 'Load partitioning in Al<sub>2</sub>O<sub>3</sub>-Al composites with three-dimensional periodic architecture'. Together they form a unique fingerprint.

Cite this