Microfluidic three-electrode cell array for low-current electrochemical detection

This paper reports the implementation and calibration of a microscopic three-electrode electrochemical sensor integrated with a polydimethylsiloxane (PDMS) microchannel to form a rapid prototype chip technology that is used to develop sensing modules for biomolecular signals. The microfluidic/ microelectronic fabrication process yields identical, highly uniform, and geometrically well-defined microelectrodes embedded in a microchannel network. Each three-microelectrode system consists of a Au working electrode with a nominal surface area of 9 μm ², a Cl ₂ plasma-treated Ag/AgCl reference electrode, and a Au counter electrode. The patterned electrodes on the glass substrate are aligned and irreversibly bonded with a PDMS microchannel network giving a channel volume of 72 nL. The electrokinetic properties and the diffusion profile of the microchannels are investigated under electrokinetic flow and pressure-driven flow conditions. Cyclic voltammetry of 10 mM K ₃Fe(CN) ₆ in 1 M KNO ₃ demonstrates that the electrode responses in the cell are characterized by linear diffusion. The voltammograms show that the system is a quasi-reversible redox process, with heterogeneous rate constants ranging from 3.11 to 4.94 × 10 ^-3 cm/s for scan rates of 0.1-1 V/s. The current response in the cell is affected by the adsorption of the electroactive species on the electrode surface. In a low-current DNA hybridization detection experiment, the electrode cell is modified with single-stranded thiolated DNA. The electrocatalytic reduction of 27 μM Ru(NH ₃) ₆ ³⁺ in a solution containing 2 mM Fe(CN) ₆ ^3- is measured before and after the exposure of the electrode cell to a 500-nM target DNA sample. The preliminary result showing an increase in the peak current response demonstrates the hybridization-based detection of a complementary target DNA sequence.