Modeling and experimental analysis of margin forces in microdrilling

M. N. Jalisi; C. Lin; Kornel Ehmann

Modeling and experimental analysis of margin forces in microdrilling

M. N. Jalisi^*, C. Lin, Kornel Ehmann

^*Corresponding author for this work

Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Scopus citations

Abstract

The problem of the cutting action of the drill's margin in small deep hole drilling operations for an elastically deformed drill is addressed. For the theoretical prediction of the magnitudes of the resulting forces a mechanistic model, based on the proportionality of the undeformed chip thickness and cutting force, is adopted. Specially designed experiments, simulating the cutting action of buckled drills, are used for the verification of the predicted values.

Original language	English (US)
Title of host publication	Manufacturing Processes and Materials Challenges in Microelectronic Packaging
Publisher	Publ by ASME
Pages	25-33
Number of pages	9
ISBN (Print)	0791808963
State	Published - Dec 1 1991
Event	Winter Annual Meeting of the American Society of Mechanical Engineers - Atlanta, GA, USA Duration: Dec 1 1991 → Dec 6 1991

Publication series

Name	American Society of Mechanical Engineers, Applied Mechanics Division, AMD
Volume	131
ISSN (Print)	0160-8835

Other

Other	Winter Annual Meeting of the American Society of Mechanical Engineers
City	Atlanta, GA, USA
Period	12/1/91 → 12/6/91

ASJC Scopus subject areas

Mechanical Engineering

Cite this

@inproceedings{4e5821405d6843269ba1d89dc123a6d9,

title = "Modeling and experimental analysis of margin forces in microdrilling",

abstract = "The problem of the cutting action of the drill's margin in small deep hole drilling operations for an elastically deformed drill is addressed. For the theoretical prediction of the magnitudes of the resulting forces a mechanistic model, based on the proportionality of the undeformed chip thickness and cutting force, is adopted. Specially designed experiments, simulating the cutting action of buckled drills, are used for the verification of the predicted values.",

author = "Jalisi, {M. N.} and C. Lin and Kornel Ehmann",

year = "1991",

month = dec,

day = "1",

language = "English (US)",

isbn = "0791808963",

series = "American Society of Mechanical Engineers, Applied Mechanics Division, AMD",

publisher = "Publ by ASME",

pages = "25--33",

booktitle = "Manufacturing Processes and Materials Challenges in Microelectronic Packaging",

note = "Winter Annual Meeting of the American Society of Mechanical Engineers ; Conference date: 01-12-1991 Through 06-12-1991",

}

Jalisi, MN, Lin, C & Ehmann, K 1991, Modeling and experimental analysis of margin forces in microdrilling. in Manufacturing Processes and Materials Challenges in Microelectronic Packaging. American Society of Mechanical Engineers, Applied Mechanics Division, AMD, vol. 131, Publ by ASME, pp. 25-33, Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, GA, USA, 12/1/91.

Modeling and experimental analysis of margin forces in microdrilling. / Jalisi, M. N.; Lin, C.; Ehmann, Kornel.
Manufacturing Processes and Materials Challenges in Microelectronic Packaging. Publ by ASME, 1991. p. 25-33 (American Society of Mechanical Engineers, Applied Mechanics Division, AMD; Vol. 131).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Modeling and experimental analysis of margin forces in microdrilling

AU - Jalisi, M. N.

AU - Lin, C.

AU - Ehmann, Kornel

PY - 1991/12/1

Y1 - 1991/12/1

N2 - The problem of the cutting action of the drill's margin in small deep hole drilling operations for an elastically deformed drill is addressed. For the theoretical prediction of the magnitudes of the resulting forces a mechanistic model, based on the proportionality of the undeformed chip thickness and cutting force, is adopted. Specially designed experiments, simulating the cutting action of buckled drills, are used for the verification of the predicted values.

AB - The problem of the cutting action of the drill's margin in small deep hole drilling operations for an elastically deformed drill is addressed. For the theoretical prediction of the magnitudes of the resulting forces a mechanistic model, based on the proportionality of the undeformed chip thickness and cutting force, is adopted. Specially designed experiments, simulating the cutting action of buckled drills, are used for the verification of the predicted values.

UR - http://www.scopus.com/inward/record.url?scp=0026404588&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0026404588&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0026404588

SN - 0791808963

T3 - American Society of Mechanical Engineers, Applied Mechanics Division, AMD

SP - 25

EP - 33

BT - Manufacturing Processes and Materials Challenges in Microelectronic Packaging

PB - Publ by ASME

T2 - Winter Annual Meeting of the American Society of Mechanical Engineers

Y2 - 1 December 1991 through 6 December 1991

ER -

Modeling and experimental analysis of margin forces in microdrilling

Abstract

Publication series

Other

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this