Solid oxide fuel cell with oxide anode-side support

Manoj R. Pillai, Yi Jiang, Negar Mansourian, Ilwon Kim, David M. Bierschenk, Huayang Zhu, Robert J. Kee, Scott A Barnett

Research output: Contribution to journalArticle

22 Scopus citations

Abstract

Solid oxide fuel cells (SOFCs) with Sr0.8 La0.2 Ti O3 anode-side supports, along with Ni- Y2 O3 -stabilized ZrO2 (YSZ) anode, YSZ electrolyte, and LSM-YSZ (LSM= La0.8 Sr0.2 Mn O3) cathode, were prepared. Button cells yielded a power density up to 1.0 W cm2 in humidified H2 and air at 800°C. The cells showed much-improved stability against coking in methane compared with conventional Ni-YSZ anode-supported SOFCs. A detailed model was used to fit the SOFC electrical results and to show that the good stability in methane was a result of the high O-to-C ratio in the Ni-YSZ anode due to the Sr0.8 La0.2 Ti O3 support.

Original languageEnglish (US)
JournalElectrochemical and Solid-State Letters
Volume11
Issue number10
DOIs
StatePublished - Aug 25 2008

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Materials Science(all)
  • Physical and Theoretical Chemistry
  • Electrochemistry
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Solid oxide fuel cell with oxide anode-side support'. Together they form a unique fingerprint.

  • Cite this

    Pillai, M. R., Jiang, Y., Mansourian, N., Kim, I., Bierschenk, D. M., Zhu, H., Kee, R. J., & Barnett, S. A. (2008). Solid oxide fuel cell with oxide anode-side support. Electrochemical and Solid-State Letters, 11(10). https://doi.org/10.1149/1.2957602