Structural and electrochemical study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co 0.13O2 cathode material using ALD

Xiaofeng Zhang, Ilias Belharouak*, Li Li, Yu Lei, Jeffrey W. Elam, Anmin Nie, Xinqi Chen, Reza S. Yassar, Richard L. Axelbaum

*Corresponding author for this work

Research output: Contribution to journalArticle

272 Scopus citations

Abstract

Nanolayers of Al2O3 and TiO2 coatings were applied to lithium- and manganese-rich cathode powder Li1.2Ni 0.13Mn0.54Co0.13O2 using an atomic layer deposition (ALD) method. The ALD coatings exhibited different surface morphologies; the Al2O3 surface film appeared to be uniform and conformal, while the TiO2 layers appeared as particulates across the material surface. In a Li-cell, the Al2O3 surface film was stable during repeated charge and discharge, and this improved the cell cycling stability, despite a high surface impedance. The TiO 2 layer was found to be more reactive with Li and formed a Li xTiO2 interface, which led to a slight increase in cell capacity. However, the repetitive insertion/extraction process for the Li + ions caused erosion of the surface protective TiO2 film, which led to degradation in cell performance, particularly at high temperature. For cells comprised of the coated Li1.2Ni0.13Mn 0.54Co0.13O2 and an anode of meso-carbon-micro-beads (MCMB), the cycling stability introduced by ALD was not enough to overcome the electrochemical instability of MCMB graphite. Therefore, protection of the cathode materials by ALD Al2O3 or TiO2 can address some of the capacity fading issues related to the Li-rich cathode at room temperature.

Original languageEnglish (US)
Pages (from-to)1299-1307
Number of pages9
JournalAdvanced Energy Materials
Volume3
Issue number10
DOIs
StatePublished - Oct 1 2013

Keywords

  • atomic layer deposition
  • cathode materials
  • lithium-ion batteries
  • surface modification

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Materials Science(all)

Fingerprint Dive into the research topics of 'Structural and electrochemical study of Al<sub>2</sub>O<sub>3</sub> and TiO<sub>2</sub> Coated Li<sub>1.2</sub>Ni<sub>0.13</sub>Mn<sub>0.54</sub>Co <sub>0.13</sub>O<sub>2</sub> cathode material using ALD'. Together they form a unique fingerprint.

  • Cite this

    Zhang, X., Belharouak, I., Li, L., Lei, Y., Elam, J. W., Nie, A., Chen, X., Yassar, R. S., & Axelbaum, R. L. (2013). Structural and electrochemical study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co 0.13O2 cathode material using ALD. Advanced Energy Materials, 3(10), 1299-1307. https://doi.org/10.1002/aenm.201300269