The theoretical stability chart of machine tools-A development of S. A. Tobias' theory

X. G. Yang; J. W. Chen; S. Z. Li; K. F. Eman

doi:10.1016/0890-6955(89)90038-2

The theoretical stability chart of machine tools-A development of S. A. Tobias' theory

X. G. Yang^*, J. W. Chen, S. Z. Li, K. F. Eman

^*Corresponding author for this work

Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

The influence of various cutting parameters and in particular of the cutting speed on the cutting process dynamics and hence their influence on the stability chart of machine tools is discussed in this paper. Subsequently a method of stability analysis is proposed considering these influences. By utilizing this method and experimental results on cutting published in recent decades, the paper corrects some assumptions of the traditional analysis which were in disagreement with practice. The proposed method brings the stability chart into closer agreement with available evidence and makes it more practical in use.

Original language	English (US)
Pages (from-to)	267-274
Number of pages	8
Journal	International Journal of Machine Tools and Manufacture
Volume	29
Issue number	2
DOIs	https://doi.org/10.1016/0890-6955(89)90038-2
State	Published - 1989

ASJC Scopus subject areas

Mechanical Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1016/0890-6955(89)90038-2

Cite this

@article{5b745e181b8641018a423bc0572308da,

title = "The theoretical stability chart of machine tools-A development of S. A. Tobias' theory",

abstract = "The influence of various cutting parameters and in particular of the cutting speed on the cutting process dynamics and hence their influence on the stability chart of machine tools is discussed in this paper. Subsequently a method of stability analysis is proposed considering these influences. By utilizing this method and experimental results on cutting published in recent decades, the paper corrects some assumptions of the traditional analysis which were in disagreement with practice. The proposed method brings the stability chart into closer agreement with available evidence and makes it more practical in use.",

author = "Yang, {X. G.} and Chen, {J. W.} and Li, {S. Z.} and Eman, {K. F.}",

year = "1989",

doi = "10.1016/0890-6955(89)90038-2",

language = "English (US)",

volume = "29",

pages = "267--274",

journal = "International Journal of Machine Tools and Manufacture",

issn = "0890-6955",

publisher = "Elsevier Ltd",

number = "2",

}

TY - JOUR

T1 - The theoretical stability chart of machine tools-A development of S. A. Tobias' theory

AU - Yang, X. G.

AU - Chen, J. W.

AU - Li, S. Z.

AU - Eman, K. F.

PY - 1989

Y1 - 1989

N2 - The influence of various cutting parameters and in particular of the cutting speed on the cutting process dynamics and hence their influence on the stability chart of machine tools is discussed in this paper. Subsequently a method of stability analysis is proposed considering these influences. By utilizing this method and experimental results on cutting published in recent decades, the paper corrects some assumptions of the traditional analysis which were in disagreement with practice. The proposed method brings the stability chart into closer agreement with available evidence and makes it more practical in use.

AB - The influence of various cutting parameters and in particular of the cutting speed on the cutting process dynamics and hence their influence on the stability chart of machine tools is discussed in this paper. Subsequently a method of stability analysis is proposed considering these influences. By utilizing this method and experimental results on cutting published in recent decades, the paper corrects some assumptions of the traditional analysis which were in disagreement with practice. The proposed method brings the stability chart into closer agreement with available evidence and makes it more practical in use.

UR - http://www.scopus.com/inward/record.url?scp=0024910843&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024910843&partnerID=8YFLogxK

U2 - 10.1016/0890-6955(89)90038-2

DO - 10.1016/0890-6955(89)90038-2

M3 - Article

AN - SCOPUS:0024910843

SN - 0890-6955

VL - 29

SP - 267

EP - 274

JO - International Journal of Machine Tools and Manufacture

JF - International Journal of Machine Tools and Manufacture

IS - 2

ER -

The theoretical stability chart of machine tools-A development of S. A. Tobias' theory

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this